Don't push "Back" button of the Web browser.

Dial-up IP Connection

Serial Port 1
Software Version: 3.101
Module Version: 3.000

Firmware Version: 3.101
LAN port IP Address: 192.168.0.1   Nickname: NWG


Default Outgoing Connection


RAS Client


Enable settings of "RAS Client"
 
RAS Server Name:
User Name:
Password:
Confirm Password:
Access Number:
Use Call Back
Preset in RAS Server
Set by RAS Client to
Phone Number:

Ring Count (1 to 99 times)
RAS Client IP Address
Get by RAS Server
Preset by RAS Client
IP Address:
DNS Server IP Addresses
  Get the DNS information automatically
       from the connection site, and give
       priority to that DNS information.
   Primary DNS:
   Secondary DNS:
Address Translation
IP Masquerade
NAT
Translation Table
   Aging Time:
 
Non Activity Timer
Non Transmit Timer: mins seconds later, disconnected automatically.
Non Raceive Timer: mins seconds later, disconnected automatically.
        (Between 10 secs to 600 mins)
Set Non Disconnect Timer Period
From : to : , Not effect automatic disconnection.
When there is communication at the ending time, disconnect by "Non Activity Timer".
Automatic Connection
Enable Auto-Connection   Disable Auto-Connection (Use Manual Only)
 
Extra AT commands: (optional)